CMM Laser

CMM Laser

CMM has been specialized in laser cutting and steel transformation for more than 40 years and proposes a complete service to its customers, from the engineering to the realization of different stainless-steel and carbon structures and components. Its last generation high-efficiency energy-saving equipments are used for laser cutting of tubes up to Ø 508 mm thick and sheets up to 20 mm thick. Through bending, punching and robotic welding the company can provide a variety of services. Thanks to the partnerships with the main national companies, CMM satisfies every necessity of finishing and superficial treatments in various commodities sectors.
Pipes laser cutting department:

CMM is one of the main European centres which are specialized in stainless-steel pipes, tubulars and profiles laser cutting. Over the years, 6 laser equipments were installed in order to cut pipes with minimum 10 mm and maximum 508 mm diameter. The processes which can be realized on pipes are: drilling, notching, marking, chamfering, 2D and 3D inclined cutting.
Workable sections :

Round pipe : 508 mm maximum diameter
Squared pipe : 400 x 400 mm maximum section
Rectangular pipe : 500 x 300 mm maximum section
Length: 15 m maximum
Workable materials:
Carbon steel maximum 20 mm thick, stainless-steel maximum 6 mm thick, Aluminum maximum 3 mm thick.
CMM dedicated specific laser equipments to each of these pipe or profile types to guarantee the best performances in every situation.
CMM realizes shaping, drilling and special cuts in preparation for welding and assembling phases on structural pipes and open profiles, considerably reducing the production costs of many metal structures.

Sheets laser cutting department:

The sheets department has got 3 laser cutting equipments with automatic loading and unloading  in order to realize manufacturing on sheets 4040 x 2500 mm maximum.

Workable materials:
Carbon steel, boron steel, S355, Domex Maximum 20 mm thickness 
Stainless -steel and wear-resistant steel Maximum 15 mm thickness
Aluminium     Maximum 12 mm thickness 
Copper     Maximum 8 mm thickness 
Brass      Maximum 8 mm thickness 
CMM performs bending with advanced and numerical control machines. The maximum length of a piece is 4000 mm. A broad range of standard and special equipments, moulds and dies permits every kind of deformation.

The steelwork division is situated in the same production plant . Here the company performs  manually or through robotic cells welding, preassembling and different finishing operations.

CMM manufacturing developed in the past on punching operations. Two loading and unloading equipments are used for brushing, enclosures, perfored and deep-drawn sheets with different shape and dimension. A anti-slip product line has been developed recently.

ANTI-SLIP SURFACES
CMM offers standard solutions and modulars which are ideal for stairs, balconies, walkways, industrial facilities for inspections and working platforms. They were planned and produced leaving the possibility for personalized solutions.
The profiles are usually realised in the following materials:
Pregalvanised sheet (DX51D+Z275)
Stainless steel (AISI 304 – AISI 316)
Peraluman (5754 H111)
Carbon steel (S235)
All the profiles can be provided powder-coated, liquid-coated, electrolytically or hot galvanized according to the requirements.
Thanks to our efficient and flexible production system, our delivery times are extremely limited.
Since there is no need for the company to follow shapes, and considering that anti-slip combinations are various, it is possible to design solutions which are very different from the classic rectangular steps, with curve profiles which are adaptable to every situation. 
Divisione Tubi

CMM srl
Via Marchionale 56
46046 Medole (MN) Italy
Tel. +39 0376 898150
Fax +39 0376 899069
mail : tubi@cmmlaser.it


Divisione Lamiere

CMM srl
Via Marchionale 72
46046 Medole (MN) Italy
Tel. +39 0376 898150
Fax +39 0376 868335
mail : lamiere@cmmlaser.it
CMM Laser
CMM Laser
CMM Laser
CMM Laser
CMM Laser
CMM Laser
CMM Laser
CMM Laser
CMM Laser
CMM Laser
CMM Laser
CMM Laser
CMM Laser
CMM Laser
CMM Laser

Privacy
According to D. Lgs. 196/03, the data collected will be used only to inform about the activities and initiatives of Associazione Industriali Mantova and will not be disclosed to third parties. The conferment of data is optional, but without personal information will not be possible to provide the services requested. The interested party may exercise its rights under Art. 7, D. Lgs. 196/03. The holder of the treatment is Associazione Industriali Mantova - Mantova - Italy.

Omeganet - Internet Partner